background image

4

•  CAUTION! NEVER LEAVE YOUR CHILD UNATTENDED!

•  CAUTION! DO NOT USE ANCHOR POINTS OTHER THAN THE ONES DESCRIBED IN THIS 

MANUAL AND MARKED ON THE RESTRAINT SYSTEM. 

•  CAUTION! NEVER INSTALL THE CHILD RESTRAINT IN THE DIRECTION OF VEHICLE MOVE-

MENT AND FACING FORWARD BEFORE THE CHILD WEIGHT REACHES 9 kg!

•  CAUTION! THE CAR SEAT SEAT SAFETY HARNESS MUST BE PROPERLY ADJUSTED AC-

CORDING TO CHILD’S HEIGHT, NOT TWISTED AND SNUG WELL AGAINST BABY’S BODY.

•  CAUTION! THIS CHILD RESTRAINT SHOULD NOT BE MODIFIED OR ADAPTED WITH NEW 

FITTINGS, WITHOUT PREVIOUS AUTHORIZATION BY THE COMPETENT AUTHORITY.

•  CAUTION! KEEP AWAY FROM FIRE!

•  Installation in the vehicle and securing the child in the car seat to be done only by adult! 

•  The hard parts and the parts of the child restraint made of plastic should be located and installed 

so that when the vehicle is in normal use, they can not be trapped by a sliding seat or in a door of the 

vehicle.

•  Do not allow the safety belts of the car seat and the vehicle to be twisted, frayed or torn, latches and 

locks (buckles) must be always in good order and firmly fixed.

•  If you find uncertainty or defect in the structure, latches, straps or locking mechanisms of the car 

seat or ISOFIX attachments, discontinue usage until removal of the damaged parts and replacement 

with new ones.

•  After a violent impact the car seat and belts may be damaged. Therefore, it is recommended to 

replace the car seat with a new one.

•  Never use a second hand child restraint. It may have suffered structural damage, which may make 

the child restraint extremely dangerous.

•  Do not use this car seat without its seat cover and do not replace it with a new one, unless supplied 

by the manufacturer. The fabric parts are integral parts of the restraint system and its safety features!

•  Always make sure that you are not carrying any unsecured objects, especially on the back shelf, 

which, in case of an accident, may injure the car’s occupants.

•  Do not put additional pads except the ones supplied from the manufacturer! Placing additional pads 

may obscure the safety of your child.

•  Do not use spare parts and other components not supplied by the manufacturer. The manufacturer 

assumes no responsibility for safety in the event that are used spare parts other than original.

•  It is recommended to cover the car seat if the vehicle is parked under strong sun shine – extreme 

sun exposure will make the plastic to deteriorate and the fabric to fade. Please, check that the child 

restraint has not become too hot before placing your child seat.

•  The child car seat does not replace the child’s cot or bed. When a child needs a sleep, you have to 

place him in a suitable baby stroller, baby crib or bed.

•  Do not attach objects with long cords or strings on the car seat in order to avoid danger of suffoca

-

tion!

•  Never place a child seat on beds, couches or similar soft surfaces!

•  Do not allow children to play with the product!

•  Do not remove stickers and warnings – they contain important information!

•  The packaging of the product must be kept out of the reach of children at the time of and after un

-

packing in order to avoid the risk of strangulation!

Содержание Campo













Отзывы: