Chipolino BOLIDE, Инструкция по эксплуатации

Страница: 4 / 11

3
А Frame F-5 М6х45 Screw M Rear axle
B Front fork F-6 Bracket N-1 Mudguard
C Rear wheels G Steering bar N-2 Rod
D Front wheel H Back rest O Seat
E Push bar (bottom) I-1 Storage basket P Safety bumper
F-1 М6х30 Screw I-2 Seat pad Q-1 Parking device parts 1
F-2 М6 Cap nut J Push bar (top) Q-2 Parking device parts 2
F-3 6 mm Shim K Canopy
R Upper foot rest
F-4
Screw
L
Lower foot rest
ASSEMBLY AND MOUNTING
1. Insert the front fork (B) to the front
wheel (D) .
IMPORTANT: Please pay attention to
the correct position of the front fork to
the frame!
2. Fix with a (М6x30) screw, 6mm shim
and М6 Cap nut
step 1
step 2
necessary tools
fig. 1
fig. 2-2
3. Place the mudguard (N) onto the front
fork. Note that the shorter side of the
mudguard must face forward, and the
longer one – face the frame. Push care
fully down until the mudguard touches
the shoulders of the front fork (fig.2-2).
4. Align the front tube of the frame (A)
with the front fork. Position the convex
part of the mudguard to the slot in the
frame as shown in fig.2-2.
F-1
N-1
F-3 F-2
B
D
B