KT-LCD6 e-Bike Display User Manual
V1.0
Dear customer, please read this manual before you use KT-LCD6 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1
UP button
9
Mil
Distance (
imperial
)
2
SW button
DST
Trip distance
3
DOWN button
ODO
Total distance
4
Battery capacity indicator
VOL
Battery voltage
5
TM
Single trip time
10
Backlight and headlights
TTM
Total trip time
11
The brake display
6
KM/H
Riding speed(
metric)
12
CRUISE
Cruise function display
MPH
Riding speed (
imperial
)
PAS
PAS starting display
MXS
MAX speed
THROTTLE
Turned on throttle
AVS
Average speed
13
6KM/H push power assist
7
ASSIST
Pas level
14
MOTO
℉ ℃
Motor
temperature
8
CADENCE display
MOTOR W
Motor Power
KM
Distance(
metric
)
15
℉ ℃
Environment temperature
Operation
1.
ON/OFF
Hold
button long to turn on the power, and hold
long for a second time to turn off the
power. When the motor stops driving and when the e-bike is not used for a consecutive 5 minutes, it will
automatically shut down and turn off the motor power supply.
2.
Display 1
Hold
button long to start up and enter display 1.
2.1 Turn on backlight and headlights
Hold
button long to turn on backlight and headlights (the controller
should have headlight drive output function); hold
long again to turn off
the backlight and headlights.
2.2 Assist ratio gear (
ASSIST
) switch
Hold
or
button shortly to switch 1-5 file gear. Gear 1 is for the
minimum power, gear 5 is for the highest power. Each startup will automatically
restore the gear shutdown last time (the user can set randomly). Gear 0 is
without booster function.
2.3
6KM/H
power assistant push function
Hold
button and
flashes, the vehicle drives at the speed not
more than 6Km /h. Release
button, the function is invalid.
2.4
Cruise function(
CRUISE
)
After the cruise function is turned on, the trip riding speed is greater than
7 km/ h, hold
button long and enter cruise, the CRUISE lit. Brake or hold
any button to cancel.
2.5 Turned on throttle (
THROTTLE
)
Turned on throttle, the display interface shows THROTTLE.
2.6 Power-assist startup
When the booster riding, the display interface shows PAS.
