If a transponder is detected the reader emits a “beep” and displays the transponder number in the following form:
FDXB
900 274877906744
In this case the transponder is an ISO FDX B. type transponder.
The transponder number has 15 digits (FDX B) or 10 digits.
The number remains displayed for two minutes before the reader switches itself off.
If no transponder is detected the reader beeps three times and displays:
No transponder
found!
This message will be erased after approximately 25 seconds.
The reader will then display:
SCAN
In this case, it is recommended to make two or three further attempts to read a chip, scanning more widely over
the area in which it is assumed to be implanted. Each pressing of the button (8) will restart the reading in
accordance with the process described above.
It will switch itself off automatically after two minutes to save battery power.
Recharging the battery
The reader is powered by a Lithium/ion battery. This battery is designed to allow several thousand reading operations. It
can be recharged by connecting the reader to a USB port. A fixed red LED (6) indicates that recharging is in progress
and green (6) when it is fully charged.
The service life of the battery depends not only on its use but also on the environment in which the reader is stored.
An indicator on the right of the display (5) indicates the battery charge level. When the charge is too low the reader
displays the following message:
Low battery
Only around ten more reading operations will be possible before the reader switches itself off permanently. Please
connect your device to a USB-Port to recharge the battery.
To replace the battery, open the battery compartment on the underside of the reader. It is essential to use original
batteries only. (Consult your distributor).
Specifications
Complying with standards ISO 11784/85 and 14223
Dimensions: L 15 cm, W 8 cm, Thickness 3.5 cm
Weight: 150 g
Power supply: 3.7V 1400mA rechargeable battery
Reading standards: FDX-A, FDX-B, HDX, EM4102
Reading distance: up to 8 cm
USB-Interface
Storage temperature: -10° to + 60°
Operating temperature: -5° to +40°
Bluetooth
Guarantee
One year parts and labour with return to factory.
For detailed description of the memory function and software download please visit: www.chipdeal.com --> Reader
PlusExtra
