MCDV2 Motorcycle DVR 13
Pressing the Power button briefly will turn on LED light,
Press it again to turn it off
Wired Controller Function
(Optional) A handlebar mounted wired controller
is supplied with the kit. The controller is designed to be attached to the
handlebar using touch tape (Velcro™).
With the device in any mode (Video recording, Standby or Recording mode,
press either button on the wired controller. The device will then automatically
save a two minute (2 min) video file with the name (KEY-XXXX.AVI ). This is the
same file type as EVE.XXXX.AVI. These files
will not be overwritten
automatically. When the micro-SD is full, only the normal files (REC.XXXX.AVI)
will be overwritten. This is why we recommend regular reformatting.
Video Data Backup
Chipatronic strongly recommends that you backup your video data before
reformatting the micro-SD card. Remove the micro-SD card from the device,
then insert it into a card reader connected to your computer. You may then list,
open, view, or backup your video files. You may also choose to delete or protect
files or reformat your micro-SD card.
Power on test
Before installing the kit, and for the first-time use of the device, Chipatronic
recommends using the USB cable provided in the package instead of the main
power supply. Connect the USB cable to a charger DC-5V 1A With power on,
test the device for normal recording and other functions. After the device tests
normal with power on, it is ready for installation and use.
Charging the battery
The battery in the device needs to be charged before use. For example you can:
Ÿ
Directly connect to a vehicle cigarette lighter with a USB interface;
Ÿ
Use a USB cable to connect to a computer;
Ÿ
Use the USB cable to connect to a USB charger (as above)
