Chinook 200, Руководство по установке и эксплуатации

Страница: 9 / 19

Warning: The magnet rotor on your Chinook 200 turbine is constructed using neodymium iron
boron rare earth magnets. These are extremely powerful magnets and can cause injury if not han-
dled with carefully. Take care when working with tools made of ferrous materials (such as
wrenches and screwdrivers) close to the magnetic poles. The magnetic forces between ferrous
materials and the magnet rotor will be very strong. This may cause a sudden snapping action that
can pinch or trap your fingers or skin.
Rotor Blade Assembly- Take the three rotor blades and rotor hub plate. Be careful when handling the
blades, they may have sharp edges . Use a 10mm socket & hexagon key and three M6 x 16mm long
cap-screws to attach each blade to the hub plate. The blades should all be fixed to the hub plate on the
same side, with the blades in the same orientation. It is important that a washer is used underneath the
Nylock nuts. 3 set-screws, 3 washers and 3 Nylock nuts should be used on each blade. Tighten the
Screws until the blades are safely secured. Do not over-tighten the nuts as this may damage the blades
and fixings. NOTE: the rotor hub plate has 3- clinch nuts installed for the spinner attachment, the flat side
of the clinch nut is the FRONT of the plate.
User Manual (Chinook 200) Rev D Final Page 9