INST.No.INE-555-P5
-14-
6.2
Installation
Install the thermometer to a tripod, universal head, protection case, or mounting plate etc., by using screw
holes for tripod (1/4-20UNC) or screw holes for installation (4-M4) at the bottom side.
When you install it in the protective cases of exclusive accessories, it is necessary to install it in the
protection case after having attached a compatible attachment (model: IR-ZCZS).
Please read the operation manual for an accessory when instilling it by using the exclusive accessories.
Don’t use the thermometer in the following places.
1) Dusty place or a corrosive gas atmosphere.
2) Noisy and static electricity
3) Places where the ambient temperature is higher than 60°C or lower than -10°C.
4) Places where the ambient temperature changes abruptly, or high humid places.
5) Places where there are inductive oscillator or electric power line
6) Places where there are mechanical vibrations and impacts.
7) Places where combustible or volatile gas is existed.
Screw hole for tripod 1/4-20UNC(depth 4)
Screw holes for installation
4-M4 (depth 4)
Screw holes for attaching compatible
attachment 4-M4 (depth 4)
Cau tion