Chino IR-CAK, Инструкция по эксплуатации

Страница: 13 / 28

INST.No.INE-551-P1
- 8 -
When the laser targeting is activated, the laser light is radiated from the place
marked with (*). Make sure not to stare into a beam.
4.3.2 Focusing of laser targeting function
For the laser targeting, focus a measuring object by the procedure shown below after connections
(Ref. [5. Connections and wirings]).
(1) Open the control panel cover.
(2) Measurement starts with the display of the measurement mode
screen with a temperature value displayed in the main display part
as shown right.
(3) To activate the laser targeting, press SEL and keys
simultaneously for 2 seconds in the measurement mode
screen until “
LASr ” appears in the sub display.
(4) To stop the laser targeting, press SEL and keys simultaneously
for 2 seconds in the condition that “ LASr ” is displayed in the sub
display.
(5) “ LASr ” will disappear and the screen will return to the
measurement mode screen.
Tb CONT MEM PEAK
AL AH
C
F
ε
[Measurement mode]
During the laser targeting, “ LASr ” is displayed
in the sub display as shown in the right figure.
Place the thermometer to make the laser light
target the center of a measuring object.
Reference
1. Make sure to target the laser when you want to decide the center of the
measuring object only and to keep on following the above procedure when
you exactly target the laser.
2. Any adjustment or procedure other than specified here makes you expose in
dangerous laser radiation.
C aut ion
Make sure to target the laser when you want to decide the center of the measuring
object only and to go off it after the center of the measuring object is decided.
C aut ion
Tb CONT MEM PEAK
AL AH
C
F
ε
[ Laser targeting ]
Main display
Sub display
Laser light is
radiated here. (*)
Alarm label
!
Laser may damage your eyes.
Don’t stare into a laser beam.
W a r n i n g
!
W a r n i n g
!