Ching Chi Machine UH Series, Руководство пользователя

Страница: 56 / 64

AC SERVO MOTOR INSTRUCTION MANUAL
V1.1
- 27 -
P42
End tacking stitch
compensation 1
6 0-16
End tacking stitch needle compensation
parameter 1
．
P43
End tacking stitch
compensation 2
6 0-16
End tacking stitch needle compensation
parameter 2
P44 W stitch compensation 1 6 0-16 W stitch needle compensation parameter 1
．
P45 W stitch compensation 2 6 0-16 W stitch needle compensation parameter 2
．
P46 Manual aging switch 0 0-1
0 ： run normal operation program ；
1 ： run aging program ．
P47 Pause time of aging 2000 100-9999 ms
Interval time between each running in
aging action ．
P48 Running time of aging 2000 100-9999 ms
Time between each running in aging
action( on localizer in effect)
．
P54
Signal mode of safety
switch
0 0-1
0
：
constant open
；
1 ： constant closed ．
P57
Start-up time of presser
foot up
250 20-1000 ms
Initialization time of presser foot up
Electromagnetism-metal
．
P58
Power on time of presser
foot up
2 1-50 ms
High level time of electromagnetism-metal
holding force
．
P59
Power off time of
presser foot up
3 1-50 ms
Low level time of electromagnetism
-metal holding force ．
P60
Protecting time of
presser foot up
20 1-120 s Working protecting time of presser foot up ．
P61
Delaying time of presser
foot up
50 20-800 ms
The time for starting presser foot up when
motor stops
．
P62
Delaying time of presser
foot down
50 20-800 ms The time for starting presser foot up again ．
P98
Parameter Retried to
Default Value
0000h 0-9999
Set this parameter as 8888 and save it
，
all
the parameters will be retrieved to the
original value ．
P99
Techniques Parameter
Password
2222h 0-9999