Chinavision RX102 Скачать руководство пользователя страница 16

Страница: 16 / 17

—

the device receives a command of “mask”, or

—

the devices returns to the range of the geo-fence.

Speed Alarm

Alarm indication: “speed alarm!!”

This alarm is enabled when:

—

the device receives command “speed”.

This alarm is disabled when:

—

the device receives command “nospeed”.

When the alarm is enabled, it will be triggered when:

—

the device is at a speed higher than the present value.

When the alarm is triggered, it will be sent at an interval of 3 minutes, and can be stopped when:

—

the device receives a command of “mask”, or

—

the device is at a speed lower than the present value.

Attention:

If both move alarm and speed alarm are triggered, the device will only send speed alarm.

Lack SD card space Alarm

Alarm indication: “SD card insufficient alarm, remains [vol]MB!!”

This alarm is always enabled if the SD card is available, and will be triggered when:

—

the SD card remains less than 20MB.

When the alarm is triggered, it will be sent at an interval of 3 minutes, and can be stopped when:

—

the device receives a command of “mask”, or

—

the SD card remains more than 20MB.

Attention:

The device support to communicate with a PC via a USB connection, with which the user can do some

operations on the SD card when necessary, such as file copy, file deletion and so on.

Power Off Alarm

Alarm indication: “power off alarm!!”

This alarm is always enabled, and will be triggered when:

—

the voltage of the backup battery is lower than 3.4V and no external power supply available .

This alarm will be sent only once, and the device will power off after sending out the alarm.

LED indicator status

Work Mode

LED Interval

Device Work Status

No SIM Card Install

Normal Flash

Boot standby

Battery Charging

Standby

10S/times

GPS work in dormant

Turned On Automatically Track

Records Mode

1S/times

GPS Star Search

3S/times

Get GPS Signal

SIM Card Install And Work For GSM

Network

0.3S/times

Search For GPS And GSM Network

1S/times

Get GSM Network, Search GPS Signal

3S/times

Get the GSM Network and GPS Signal

Содержание RX102


















Результаты поиска

Содержание RX102

Отзывы:

Бренды по названию

Популярные бренды

Chinavision RX102, Руководство по эксплуатации устройства

Результаты поиска

Содержание RX102

Отзывы:

Бренды по названию

Популярные бренды