ChinaPST PST-VDA-R2, Руководство пользователя

Страница: 13 / 30

13
4. System Setting
4.1 Setting ISN Code
3 buttons “ HIGH ”, “ CEN ”, “ LOW” on the distributor. Press different button, means
different code.
4.1.1 Switch on outdoor station, press “ HIGH” button and hold on about 5s. LED
light flashes 2 times and then releases it. It is in decoding state.
4.1.2 Press “ HIGH” , the light flashes 1 time, which refers to “hundred” digit.
4.1.3 Press “CEN” button, the light flashes 1 time, which refers to “ten “digit.
4.1.4 Press “LOW” button, the light flashes 1 time, which refers to “single” digit.
4.1.5 After setting the code, wait for 10s. The power’s light will be on for 5s to
represent the setting is completed.
Set the code as 401:
A. Press “ HIGH” for 4 times, the power’s light flashes.
( The hundred digit is 4 )
B. Do not press “CEN” button (The ten digit is 0)
C. Press “LOW” button 1 time, the power’s light flashes.
(The single digit is 1.)
D.
Wait for about 10 seconds. When the light is on for 5 seconds, the operation is
completed.