ChinaPST PST-ADO500, Руководство пользователя

Страница: 4 / 7

2
. the room number set
A. manually set the room number method:
After the system is powered on, Enter the password
（
#339910#
）
on the outdoor station host, the outdoor station will display
PASS. Then continue enter the password (# 12269393 #).
on the host display shows a 3-digit value (for example, 000 is the code corresponding to the decoder port)
If the displayed 3-digit value are not correct with the decoder port code value of the room number. You can enter 3 digits
directly and press "#" to confirm that . If screen display "FFFF" means empty number. If dispaly other room numbers, means
that this room number
has been set.
Can be entered directly on host ,a four-digit room number to modify (such as the room number is three digits, please add "0"
in front of the number, to make it four digit), and then press the "#" key to confirm.In this case, the room number of where the
decoder port connected indoor phone is set up.
E.g:
Set the decoder code value of 0 for the US1 room number 0101, enter the password and then enter: 000 # 0101 #
Set the decoder code value of 0 for the US2 room number 0102, enter the password and then enter: 001 # 0102 #
Set the decoder code value of 0 for the US3 room number 0103, enter the password and then enter: 002 # 0103 #
Set the decoder code value of 0 US4 for the room number 0104, enter the password and then enter: 001 # 0104 #
Note: If you need to re-code all the room number, can be first cleared and then re-encoded, clear method: press #
33992516 #
B. automatically set the room number method:
Select the automatic set the room number, apartment floor room number requirement room type is a standard (between one
ladder one household to one ladder four households). Such as the floor is one ladder one household or one ladder two
households, into the automatic set up room number mode, after input password ( # 339912 #), the host shows PASS, that
stands for automatically encoded success.
Such as the floor is one ladder three households or one ladder four households, into the automatic set up room number mode,
after input password
（
#339914#
）
, the host shows PASS, that stands for automatically encoded success. After the
automatic coding is successful, just follow the instructions in the decoder quick checklist to set up jumper.
3. the user password unlock settings: the user can set the password unlock function on the host , to facilitate future
access to open the door.
A. Set and modify unlock password operation.
1), Call the extension (indoor phone), after the extension ringing and pick up,press the "unlock" button and hold on for 5
seconds before release, hang up. Host display"_ _ _ _" ,means into the password setting program.
2), the host into the password set the program, from the keyboard input 4-digit password, the host synchronization
memory, password set up finished, by # to confirm. (Password input must be completed within 20 seconds, otherwise
the host will exit the program, re-operation)
3)If the password has been set before, through this method can also change the password.