China Honway Machinery HWG 400, Инструкция оператора

Страница: 8 / 17

ASSEMBLY
Fit the handle Changing the diamonds
• Remove the screws (A).
Shut down the machine and disconnect the power plug.
Have a set of gloves ready, as diamond tools can get very hot.
• Crank up the handlebar to the highest position.
•
•
Remove the locking knobs (B).
Fit the handle in the handle stand-off on the machine.
•
•
Pull back on handle to lift grinding head off the ground.
Lay machine back on the ground.
•
•
Refit screws (A) and locking knobs (B).
The locking knobs should be positioned in-line with the
handlebar to reduce the risk of damaging the knobs when
laying down the machine when changing tools.
•
•
Put on gloves.
Use a hammer to remove the diamond segments.
• Affix new diamond segments on the grinding disc.
•
Once new diamond segments have been attached,
reverse procedure to lower machine to ground.
7
http://www.honwaymachinery.com