China Honway Machinery HWG 400, Инструкция оператора

Страница: 2 / 17

KEY TO SYMBOLS
Symbols on the machine:
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Symbols in the operator’s manual:
Inspection and/or maintenance should be
carried out with the motor switched off and
the plug disconnected.
Always wear approved protective gloves.
Please read the operator’s manual
carefully and make sure you understand the
instructions before using the machine.
Regular cleaning is required.
Wear personal protective equipment. See
instructions under the heading ”Personal
protective equipment”.
Visual check.
WARNING! Dust forms when grinding,
which can cause injuries if inhaled. Use an
approved breathing mask. Always provide for
good ventilation.
Protective goggles or a visor must be worn.
Starting: Reduce the pressure between
grinding disc and floor by pushing down on
the handle without raising the grinding unit
off the ground.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste.
By ensuring that this product is taken care of
correctly, you can help to counteract the
potential negative impact on the environment
and people that can otherwise result through
the incorrect waste management of this product.
For more detailed information about recycling this product,
contact your municipality, your domestic waste service or the
shop from where you purchased the product.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
1
http://www.honwaymachinery.com