Chimera ARC-110, Руководство по эксплуатации

Страница: 7 / 14

7
Arc Glare Produces very bright Ultraviolet and infrared Light and these can
Damage your eyes and burn your skin if you are not wearing proper protection.

Do not weld if your helmet is cracked or broken.

Always use a face shield or welding helmet fitted with the correct glass filter. Never use
damaged safety equipment.

Do not look at an electric arc without proper protection.
Protective Clothing Must Be Worn.

When welding in an overhead position, a suitable cap is recommended to protect the
head and neck.

It is recommended that you wear industrial footwear including steel toe shoes.

Wear welding gloves at all times while welding. They will protect the hands from
Ultraviolet radiation and the direct heat of the arc.

It is also recommended that overalls be worn.
Other Important Safety Precautions:

Do not drape cables around your body.

Keep cables away from your body as much as possible.

Connect clamp as close as possible to the area to be welded.

Consult your doctor is you have a pacemaker or wear hearing aids.

Do not strike an arc until all bystanders have protective eyewear on.

This unit should never be exposed to rain or snow.

Do not use in a wet or damp environment

Do not use to thaw pipes.

This unit should be connected to main power using a 120 Volt 20 Amp circuit or a
220 volt 20 Amp breaker.