8.6
Controller settings
1.
Controller model
2.
Controller software version
3.
Controller Modbus address
4.
Controller serial number
5.
Current temperature setpoint
6.
Current room temperature
7.
Set the temperature offset.
8.
Minimum fan speed on AUTO mode
9.
Maximum fan speed on AUTO mode
10.
Measured CO2 concentration (only with CO2
measurement option)
11.
Minimum selectable setpoint
12.
Maximum selectable setpoint
13.
Delay between cooling and heating
14.
Timer until the fan speed goes back to automatic
(1 - 15 h, or no limit)
15.
Set the keypad lock on or off.
16.
Determine whether alarms are shown in the
controller or only in the BMS and alarm menus.
17.
Reset the controller settings.
18.
Go to the Service menu (service personnel only).
8.7
Modbus
1.
Modbus address
2.
Data Baud rate (9600 / 19200 / 38400)
3.
Data bits (8)
4.
Parity (Odd / Even / None)
5.
Stop bits (1 or 2)
Copyright © 2021. All rights reserved.
28 (37)
N03104128 Rev. A
VariPro Room controller – Installation and Operation Manual
