05
To Attach the Drop Side Panel
With one End Panel standing upright, attach one side of the Drop Side Panel by guiding
the pin on its upper corner into the hole located at the top of the upper Drop Side Plate.
Next, guide the pin on the bottom of the rail into the hole located at the top of the lower
Drop Side Plate.
Repeat this step for the other side of the Drop Side Panel.
To Attach the Mattress Base
Attach each side of the Mattress Base to one End Panel using two Screws and the Allen
Key. Do not tighten Screws completely. Repeat for other end of Mattress Base.
Do not screw in
completely
