4
STEP 3
Attach Back Assembly (J) as shown. Install Dowel
Pins (H) into receiving holes in End Top Rail - Left
K), End Top Rail - Right (L) and Back Assembly (J)
as shown. Also guide edge of Top Shelf (O) and
Lower Shelves (P) into receiving grooves in rails on
Back Assembly (J). Install a total of eight (8) Allen
Head Bolts (B) and thread them into metal threaded
inserts as was completed during Step 1. Tighten all
Allen Head Bolts (B) securely using Allen Wrench
(A).
See Figure 3.
Figure 3
J
Assembly
from Step 2.
B
B
B
B
B
B
B
B
H
Counterbored
Holes
AB20041_G6
H
K
L
O
P
P
STEP 4
Figure 4
RECOMMENDED LOCATION OF ATTACHMENT OF TIP RESTRAINT BRACKETS
CL
ZZ
WW
3/8”
9.5mm
5/64”
2mm
WW
0”
0 mm
Determine location of 2 wall studs if possible. If not possible, purchase an appropriate anchor system as
explained in Step 2 of the WALL STUD SAFETY BRACKET INSTRUCTIONS.
Brackets mounted on Dressing Table must be equal distant from the center (C) of Dressing Table.
=
=
ZZ
L
