3
STEP 2
Figure 2
AB20041_G5
P
Assembly
from Step 1.
P
O
Warning
Label
Slide Shelves (O) and (P) into receiving grooves as
shown.
See Figure 2.
STEP 1
Figure 1
AB20041_G4
K
All grooves should be
located above the metal
threaded insert when
installed.
M
N
N
Metal threaded insert.
N
N
M
L
Parts are
shown
assembled
on right side
of Front
Assembly (I).
B
B
H
Attach the parts shown in Figure 1 using Allen Head
Bolts (B). Note: each Allen Head Bolt (B) will be
threaded into a metal threaded insert as shown in
the enlarged diagram. Also install a Dowel Pin (H)
in the receiving holes in End Top Rail - Left (K), End
Top Rail - Right (L) and Front Assembly (I). These
are required to prevent these parts from rotating
once the unit is fully assembled. Tighten all Allen
Head Bolts (B) securely using Allen Wrench (A).
See Figure 1.
