9
Meets CPSC
Safety Requirements
SINCE 1954
TM
5216 Portside Dr.
Medina Ohio 44256 USA
Telephone: 330.722.5033
Fax: 330.722.5037
www.child-craft.com
www.foundations.com
WARNING
• DO NOT use this crib if you cannot exactly follow the accompanying instructions.
• DO NOT use this crib for a child who can climb out of it or who is taller than 90 cm.
• DO NOT place in or near this crib any cord, strap or similar item that could become
wrapped around a child’s neck.
•
DO NOT place this crib near a window or a patio door where a child could reach the
cord of a blind or curtain and be strangled.
• Ensure that the sides of the crib are properly latched or locked in the appropriate
position when a child is left unattended in it.
• Check this crib regularly before using it and do not use it if any parts are loose or
missing or if there are any signs of damage. Do Not substitute parts. Contact the
manufacturer if replacement parts or additional instructions are needed.
• Use a crib mattress that is no thicker than 15 cm thick and is of such a size that,
when it is pushed firmly against any side of the crib, it does not leave a gap of
more than 3 cm between the mattress and any part of the sides of the crib.
• Children can suffocate on soft bedding. Do Not place pillows, comforters or soft
mattresses in this crib.
Full Size Bed Configuration
Figure 9
AB20072_G14
R
O
Full Size Bed conversion:
The crib can be converted to a full size bed with the
purchase of a bed rail and slat kit from
Foundations®.
Use Allen Bolts (O) from existing hardware and
re-use the Joint Connectors (R).
Remove and save the Short Foot Assembly (C) and
Short Head Assembly (D) for future use.
For further Full size bed configuration refer to
instructions with the bed rails and slats.
See figure 9.
