3
Figure 1
STEP 1
AB20072_G5
C
F
P
Q
P
R
R
G
STEP 2
Figure 2
AB20072_G6
A
F
N
S
Construct Short Foot and Head assembly:
Short Head Assembly:
Insert Allen Head Bolts (Q) and Connector Nuts (R)
into holes in Head Post -Left (F) as shown to fill in
unused Holes.
Insert Allen Head Bolt (P) and Connector Nut (R)
into hole in Foot Post -Left (G) as shown to fill in
unused Holes. Tighten Bolts with Allen Wrench.
Align Head Post -Left (F) with Short Head Assembly
(C). Insert Allen Bolts (P) and Snug Bolts with Allen
Wrench.
Align Foot Post - Left (G) with Short Head Assembly
(C). Insert Allen Bolts (P) and Snug Bolts and Nuts
with Allen Wrench.
Tighten all Nuts and Bolts securely.
See figure 1.
Repeat the above procedure with Short Foot
Assembly (D) Head Post - Right (E) and Foot Post -
Right (H).
Stationary Side Assembly to Short Head Assembly:
Place Joint Connector Nuts (S) into holes in the
back of top rail and bottom of bottom rail of
Stationary Side Assembly (A). Align Head Post - Left
(F) with Stationary Side Assembly (A). Insert Allen
Head Bolts (N) into Head Post - Left (F) and Rotate
Joint Connectors Nuts to align threads with bolts
and snug with Allen wrench .
Tighten all Nuts and Bolts securely.
See figure 2
