CHIKO AIRTEC CKU-080AT3-HC, Инструкция по эксплуатации

Страница: 49 / 67

Chapter 4 Configuring
Settings (MODE SELECT Mode)
CMN003-006
原本
(Original instructions)
47
The setting screen appears.
6.
Press the Up/Down arrow buttons to select the desired setting.
7.
Press the ENTER button to determine the setting.
8.
To exit this mode, press the MODE SELECT button to return to normal mode.
4.3
Air Volume-Down Alert Timing Setting Mode
This mode allows for changing the timing for displaying an air volume-down warning (WARN4) as desired.
1.
Move to the MODE SELECT mode.
2.
Press the Up/Down arrow buttons to move to the air volume-down alert timing setting mode
(“Volume Down ST”).
3.
Press the ENTER button.
The current setting appears.
The default is 50%, displayed as “3: Down to 50%”.
4.
Press the Up/Down arrow buttons to select a timing between 30 to 70%.
A lower setting causes the air volume-down alert to occur later, and vice versa.
5.
Press the ENTER button to determine the setting.
6.
To exit this mode, press the MODE SELECT button to return to normal mode.
4.4
Other Setting Mode
The parameters listed below can be set.
•
Date/time setting
“ 4.4.1 Clock Calibration Mode ” (page 47 )
•
Accumulated run time resetting
“ 4.4.2 Accumulated Run Time Reset Mode ” (page 48 )
•
Setpoint resetting
“ 4.4.3 Setpoint Reset Mode ” (page 48 )
4.4.1
Clock Calibration Mode
This mode sets date and time.
1.
Move to the MODE SELECT mode.
2.
Press the Up/Down arrow buttons to move to the other setting mode (“Other Setting”).
3.
Press the ENTER button.
The screen displays “Time Adjust”.
4.
Press the ENTER button.
The date setting screen appears.