Chike e-cargo, Руководство по эксплуатации

Страница: 45 / 60

37
A
B
C
D
E
F
Car
e
and
Maint
enance
Figure 20. : Determination of chain
elongation
The replacement of the
chain requires special tools
and expertise and should
therefore be done by your dealer.
Worn sprockets or chain wheels
should also be replaced at the same
time if necessary.
Lighting system
Check regularly that the head light and
the tail light of your
b a
are working.
Make sure that the headlight is properly
adjusted such that you do not blind
approaching traffic or pedestrians.
Wear parts
Most components of your
b a
last a
whole life cycle. However, some parts
are subject to wear and must be regularly
replaced and renewed. The achievable
service life of these parts depends on
the specific use of your
b a
and the
proper maintenance. The wear parts are
Tires
Brake pads
Chain, chain ring and rear sprocket
Battery
D
Tie rod ends
These parts must be replaced when
reaching the wear limit.
Spare parts
If any component of your
b a
is
damaged, you get the respective
replacement parts from your dealer.
Cleaning
Regularly clean your
b a
. Road
salt in winter can especially lead to
increased corrosion if it is not removed
immediately. Just use a soft cloth or
sponge and pure water. Do not use
a pressure blaster because due to the
high pressure water will pass into sealed
areas and can cause damage there. In
general, you do not need any additional
cleaning products. For heavy grease or
oil stains, you can use a standard cleaning
product for bicycles. Make sure that the
chosen product does not attack the paint
surfaces.
Use the cleaning process to examine
your
b a
for possible damage such as
deeper scratches, bumps, cracks, etc. If
you notice any damage, please contact
your dealer!
After cleaning your
b a
and drying off
the remaining water, we recommend that
you preserve your
b a
. To this end
appropriate bicycle care products can
be used. Follow the instructions of the