Chike e-cargo, Руководство по эксплуатации

Страница: 33 / 60

25
A
B
C
D
E
Operation
1 2
3
Figure 9. : Cycle computer
1 : Power switch
2 : Light switch 3 : Display area
1
2
3
4
Figure 10. : Battery
1 : Charge
connector
2 : Locking
3 : Power button
4 : Battery level
indication
Do not apply any torque
to the crank shaft when
powering on the drive
system. Otherwise the motor may
start to run, which most probably is
not desired in this situation.
1
2
3
Figure 11. : Assist switch
1 : Display mode
2 : Increase assist level
3 : Decrease assist level
1
Figure 12. : Attaching the cycle
computer
1 : Release lever
Charging the battery
To
charge the battery plug the charging
cable of the included battery charger into
the into the charging socket 1 , fig. 10,
p. 25 at the battery mount. If you do
not have the opportunity to charge the
battery attached to your
b a
, detach
the battery. To this end put the provided
key into the lock at the battery mount
2 , fig. 10, p. 25. Turn the key counter
clockwise as far as possible and slide the
front end of the battery to the left until it
is completely released.