Chigo CCA-18CR1, Техническое руководство

Страница: 165 / 177

R410A50Hz Universal Outdoor Series Technical Manual Installation
162 GD Chigo Heating & Ventilation Equipment Co., Ltd.
5.Insulation Work
5.1 Insulation material and thickness
5.1.1. Insulation material
Insulation material should adopt the material which is able to endure the pipe’s temperature:
no less than 70
℃
in the high-pressure side, no less than 120
℃
in the low-pressure side(For
the cooling type machine, no requirements at the low-pressure side.)

Example: Heat pump type----Heat-resistant Polyethylene foam (withstand above 120
℃
)
Cooling only type----Polyethylene foam (withstand above 100
℃
)
5.1.2. Thickness choice for insulation material
Insulation material thickness is as follows:
Pipe diameter (mm) Adiabatic material thickness
Refrigerant pipe
Φ6.4
—
Φ25.4
10mm
Φ28.6
—
Φ38.1
15mm
Drainage pipe Inner
diameterΦ20
—
Φ32
6mm
5.2 Refrigerant pipe insulation
5.2.1. Work Procedure
①
Before laying the pipes, the non-jointing parts and non-connection parts should be heat
insulated.
②
When the gas proof test is eligible, the jointing area, expanding area and the flange area
should be heat insulated
5.2.2. Insulation for non-jointing parts and non-connection parts
wrong right
Gas pipe and liquid pipe should
not be put together to insulate
Insulate the gas pipe
(cooling only)
Insulate the gas pipe and
liquid pipe