——
we ride
——
Home Comfy
ChiefRider Scooter Corporation
26
Do not attempt to open the battery charger case. If the battery charger does not appear to
be working correctly, contact your authorized ChiefRider Provider.
If the battery charger is equipped with cooling slots, then do not attempt to insert objects
through these slots.
If your battery charger has not been tested and approved for outdoor use, then do not
expose it to adverse or extreme weather conditions. If the battery charger is exposed to
adverse or extreme weather conditions, then it must be allowed to adjust to the difference in
environmental conditions before use indoors. Refer to the manual supplied with the battery
charger for more information.
Follow these easy steps to charge the batteries
:
►
Position the front of your scooter close to a standard electrical outlet.
►
Remove the key from the key switch.
►
Make sure that the manual freewheel lever is in the drive position.
►
Plug the 3-pin charger mobility cord into the off-board charger port(
Figure 7
).
►
Extend the charger and plug it into the electrical outlet.
►
We recommend that you charge the batteries for 8 to 12 hours.
►
When the batteries are fully charged, unplug the charger from the electrical outlet and
then from the off-board charger port.
►
The LED lights on the charger indicate different charger conditions at various times:
charger mobility on, charging in progress, and charging complete. Refer to the manual
supplied with the charger for a complete explanation of these indicators.
►
There is a charger inhibit function on your scooter. The scooter will not run while the
batteries are charging.