Installation Instructions
WMAC16
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
NOTE:
The WMAC16 short throw wall plate can be used on
any length dual stud short throw wall mount (WM2
Series).
1.
Remove endcaps from short throw mount by removing four
Phillips pan head sheet metal screws. (See Figure 1)
Figure 1
2.
Loosely attach short throw wall plate (A) to short throw wall
mount using two of the Phillips pan head sheet metal
screws removed in Step 1. (See Figure 2)
IMPORTANT ! :
Only partially tighten screws so that
cover may be lifted forward to manage cables in next
step.
Figure 2
3.
Lift short throw wall plate (A) forward and organize cables
underneath it as desired. (See Figure 2)
4.
Slide short throw wall plate (A) back against wall. (See
Figure 2)
5.
Tighten two screws to secure wall plate to mount. (See
Figure 2)
A (1)
[wall plate]
1
X 4
short throw mount
endcap x 2
(A)
2
short throw mount
removed
screws X 2
5
(loosely)
(tighten)
5
(A)
2
short throw mount
removed
screws X 2
5
(loosely)
(tighten)
3
4
