CHIEF WMA1S, Руководство по установке

Страница: 12 / 16

WMA1S Installation Instructions
12
Security Screw Installation (Optional)
1. Remove two #8 x 1/2" Phillips screws (U) and two #10 x 1"
Phillips screws (V) from top and lower covers. (See Figure 22)
2. Install two 8-32 x 1/2" buttonhead security screws (H) and
two 10-24 x 1" buttonhead security screws (L) into top and
lower covers. (See Figure 22)
Figure 22
3. Remove two bolts holding stop bracket in place on
underside of WMA1S. (See Figure 23)
Figure 23
4. Install two 1/4-20 x 1/2" button head security screws (J)
through holes in stop bracket and into holes in sliding nuts.
(See Figure 24)
Figure 24
5. (Optional) Remove column from WMA1S according to
column installation instructions.
NOTE:
For ease of installation, it is recommended to remove
column prior to performing the following steps. For
most mounts, it will be necessary to remove column
prior to install of four security screws to WMA1S.
6. Remove one of four bolts from adapter plate. (See Figure 25)
Figure 25
2
(V) x 2
(L) x 2
2
(H) x 2
1
(U) x 2
1
x 2 3
Stop bracket
4
(J) x 2
Sliding nuts location
Stop bracket
Adapter plate
6
x 4 (one at a time)