CHIEF Vulcan ADU CHH5402, Оригинальное руководство пользователя, Страница: 5 / 22

5
GENERAL DESCRIPTION
Infrared heating, microprocessor controlled, fully automatic
system, suitable for bodywork applications.
New Vulcan ADU control touch screen with user-friendly
graphics, to aid the operator in using this machine. Choose
between automatic and manual mode or according to
temperature profiles. USB interface to export data relating to
performed heating profiles.
This heating system's main features are:
1. Temperature management both in °C and °F.
2. USB interface to load the pre-parameterized profiles for
the automatic and temperature profile operating modes.
3. Firmware upgrade through USB.
4. Alarms buzzer.
5. Automatic recognition of the type of heating tool
connected to the machine.
SAFETY REQUIREMENTS
This paragraph contains important information
on how to use the product safely. Anyone using
this product must read and understand its
contents before using the machine. You must
follow what is indicated.
Use the Vulcan ADU in a place that meets the following
characteristics:
It must be used in a closed environment and may not be
used outdoors.
Ambient temperature between 41 and 104 °F and not higher
than 914 yard above sea level.
In a well-ventilated, dry area, free from dust, vapours, acid
fumes.
Not to be used in environments with explosive atmosphere or
fire risk.
In a well-lit room in relation to the work to be done.
Floor must be level, smooth and obstacle-free.
If you plan on using this machine for work that may generate
fumes, you should install a suitable suction system.
The polymerization of adhesives can generate fumes that can be
harmful if inhaled. Follow the directions provided by the material
manufacturers, so as to take the necessary protective measures.
In order to use this machine safely, it must first of all be installed
by qualified personnel, complying with all the instructions
provided in the "INSTALLATION" chapter.
Experienced personnel should carry out the job. The machine
should be adjusted solely by personnel authorized to do so.
Since machine adjustments affect operational safety, whoever
performs said adjustments must possess the required skill.
Carefully follow the instructions provided in the "WORK"
paragraph.
It is forbidden for more than one person to work on this
machine at a time
. Prohibit access to the work area to anyone
who is not authorized to operate this machine.
While working with this machine, use
tinted glasses to reduce glare due to
light reflection on heated parts. Wear
work gloves or use special tools when
handling heated sheets to avoid getting burnt.
Some parts of the
machine (heating tools) may get
excessively hot if the machine is used at a too-fast
work pace. Carefully analyze work conditions and
use appropriate personal protective equipment
(such as gloves, aprons and other PPE clothing).
The sheets on which work is performed reach high
temperatures in the heated area.
Make sure there
are no flammable materials in contact with or
close to the sheets on which you have to work as
they could ignite during the process. Always wear suitable
protective gloves to avoid getting burnt.
Your gloves should always be dry and in good condition.
Keep the area surrounding the machine free of
flammable materials. In case of fire do not use water
but do use adequate fire extinguishers.
Do not cover the machine's air grids. Insufficient
ventilation could cause excessive temperature and trigger a fire.
Do not pull the machine's cables when moving it around. Do not
pull its cord to remove the plug from the socket. Keep cords
away from heat, oil and sharp edges. If you damage the power
cord while working, unplug the power plug immediately. Do not
use the machine if the power cord is damaged.
Machine maintenance should be carried out by carefully
following
the safety instructions provided in the
"MAINTENANCE" chapter. In particular, be sure to power off
the machine before carrying out maintenance in the heating
tool.