CHIEF PSMH2860, Руководство по установке

Страница: 6 / 12

PSMH2860 Installation Instructions
6
ASSEMBLY AND INSTALLATION
Installing Mounting Buttons
1. Attach four mounting buttons (B) to back of display using
four M8 x 25mm Phillips head cap screws (E). (See Figure 1)
Figure 1
NOTE:
Depending on installation requirements, proceed to
either Landscape (Horizontal) Set-Up or Portrait
(Vertical) Set-Up section.
Landscape (Horizontal) Set-Up
1. Install latching flag (C) using one 10-24 x 1/2" flat head
Phillips screw (D), one spacer (G), and one 10-24 lock nut
(F). (See Figure 2)
2. Proceed to Attaching PSMH2860 to Wall section.
Figure 2
Portrait (Vertical) Set-Up
1. Remove and save Phillips head screw from landscape/
portrait position latch. (See Figure 3)
2. Move position latch from landscape position to portrait
position. (See Figure 3)
3. Replace Phillips head screw removed in Step 1.
1 (E) x 4
(B) x 4
Display
1
(D)
(C)
(G)
(F)
[Attaching latching flag in landscape version]
Figure 3
1
3
Position latch
Position latch
Position latch
for PORTRAIT
Position latch
for LANDSCAPE
[PSMH2860 ships
with latch in this
position]
2