3.
Securely anchor the plasma static mount to the wall using wall studs or supporting framework
(see
Figure 4).
4. Make sure the flag is lowered to the side before attempting to place the display on the mount.
5.
With the aid of another person, lift the display up to the mount, align the mounting buttons on the
display with the teardrop slots in the mount, and set the display into place.
6. Position (raise) the flag
to secure the display.
Mounting Button
Locations
Figure 2
Figure 3
10-24 Nylock Nut
installed from
Latching Flag
(Note inner
Nylon Washer
between flag & mount
10-24 x .5 FH
Undercut Screw
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 4
