10
2.5 Maintenance
The tool‘s hydraulic system, pneumatic
control
sys
tems, hoses and couplings
must all be kept free of dirt and other
contamination. Foreign bodies in the hy-
draulic oil or in the control air can cause
the tool system to malfunction.
All maintenance and service work on the
stamping and riveting tool must only be
performed with the pump disconnected.
All maintenance and service work on the
pump must only be performed with the
air disconnected and the oil drained.
Normally, pump maintenance only entails a
regular oil change (see 2.2 for permissible oils).
6.1
All other necessary maintenance work and/
or repairs should be performed by the ma-
nufacturer or properly trained personnel.
With normal use of the pump, hydraulic oil
should be changed every 80 operating hours
or every 12 months. Make sure that used oil is
disposed of as required by national environ-
mental legislation.
Oil that is not properly disposed of could
harm the environment.
The user must only perform the maintenance
and repair measures outlined in this instruc-
tion manual.
Maintenance and repair work not covered in
this instruction manual may only be perfor-
med by professionals with proper training by
Chief Automotive Technologies. For further
information on servicing and training, please
contact us at our Service address:
Chief Automotive Technologies
Service
996 Industrial Drive
Madison, IN 47250
Phone:
800-445-9262
Fax:
866-275-0173
Accessories and spare parts:
http://www.chiefautomotive.com
Period of time
Maintenance work
Every 6
months or
if required
External cleaning by the
customer
Check oil level and
top up oil if required
After 12
months
Oil change
24 months
Complete maintenance
