Installation Instructions
MSP-YM4 / MSP-YMACC1
7
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Use screws
provided with this product.
2.
Attach brackets to back of screen using four M6 x 12mm
Phillips head screws (J) and four M6 flat washers (K) for
each screen. (See Figure 7)
Attaching Screens to Wall Mount
1.
Adjust Velcro® pull strap (if necessary) so it does not
extend beyond bottom of screen. (See Figure 8)
2.
Hang top hook of interface brackets onto the top rail of the
mount. (See Figure 8)
NOTE:
The screen initially installs into the "kickstand mode" to
allow easy cable access.
3.
Slide screens and rails to desired viewing position.
4.
Route cables between wall and rails.
CAUTION:
PINCH POINTS! Keep fingers, hands and
cables out of pinch point areas.
5.
Pull downward on the pull straps and swing inward toward
wall, latching interface brackets to lower rail and locking
bottom of screen to the mount. (See Figure 8)
Figure 8
(Screen not shown for clarity)
5
Top
Hook
Pull strap
