KRA227
Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM:
A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY:
AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT:
A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems/
accessories are properly assembled and installed using the
instructions provided.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the KRA227 does not exceed 25 lbs
(11.3 kg). In addition, when the KRA227 accessory is attached
to a K1 Series mount, the listed weight capacity of that
assembly becomes the weight capacity listed in Table 1.
Table 1: Weight Capacity
WARNING:
Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING:
Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING:
Do not use this product outdoors.
IMPORTANT ! :
The KRA227 accessory is designed to be
mounted to a K1D120, K1P120, K1S120, and K1W120 Series
mount.
--SAVE THESE INSTRUCTIONS--
MODEL
(Original
K1 Series
mount)
Max
Weight
for EACH
Display
Max Weight
Capacity of
Mounting System
with KRA227
Attached
K1D120
25 lbs
(11.34 kg)
50 lbs
(22.7 kg)
K1P120
25 lbs
(11.34 kg)
50 lbs
(22.7 kg)
K1S120
25 lbs
(11.34 kg)
50 lbs
(22.7 kg)
K1W120
25 lbs
(11.34 kg)
50 lbs
(22.7 kg)
