CHIEF KRA225, Руководство по установке

Страница: 3 / 8

Installation Instructions KRA225
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
1. Remove button head cap screw, spacers, pivot pin and lock
nut to disassemble head from K2 mounting arm. All
hardware may be discarded. (See Figure 1)
Figure 1
2. Use 5/16-18 x 3 1/8” button head cap screw (D), two thin
steel washers (H), plastic washer (J), pivot pin (G), pivot pin
spacer (C) and 5/16-18” lock nut (F) to secure KRA225
head assembly (A) to Kontour mount. (See Figure 2)
NOTE:
Cable clip (B) can be used in place of pivot point spacer
(C) if additional cable management is desired. (See
Figure 2)
Figure 2
3/16” (included)
K (1)
A (1)
[KRA225 head
3/16”
C (1)
[Pivot point
G (1)
[Pivot pin]
H (2)
D (1)
5/16-18 x 3 1/8”
F (1)
5/16-18”
spacer]
J (1)
[Plastic washer]
[Thin steel washer]
B (1)
[Cable clip]
L (1)
1/8”
1/8” (included)
1/2”
E (1)
#10-24 x 1/4”
accessory]
1
(K2W110 shown
as example)
(discard)
2
2
(K2W110 shown as example)
(D)
(N)
(J)
(G)
(K2W110 arm)
(A)
(C)
(F)
(H) x 2
or
(B)