KRA209/KRA210
Installation Instructions
6
Assembly And Installation
IMPORTANT ! :
KRA209/210 extension arms are
designed specifically for use with Chief’s K1C100 and
K1C200 mounting arms. Do NOT use with any other
mounting system!
K1 Series Mount Disassembly
1.
Remove top cap from column mount assembly. (See Figure
1)
2.
Turn column height adjustment knob counter-clockwise to
loosen mount on column. (See Figure 1)
3.
Slide mount off of column. (See Figure 1)
Figure 1
4.
Remove set screw from column support section of K1
Series mount. Set aside set screw for re-use. (See Figure 2)
5.
Pull column support section for K1 Series mount off of main
assembly. (See Figure 2)
Figure 2
KRA209/210 Installation
1.
Install K1 Series mount into opening at end of KRA209/210
extension arm. (See Figure 3)
2.
Use removed set screw to secure K1 Series mount to
KRA209/210 extension arm. (See Figure 3)
Figure 3
3.
Slide KRA209/210 extension arm onto K1 Series mount’s
column. (See Figure 4)
4.
Turn height-adjustment knobs on KRA209/210 clockwise to
secure mount in place at desired mounting height. (See
Figure 4)
5.
Replace removed top cap from column. (See Figure 4)
Figure 4
1
3
2
K1C100
column
support
section
5
4
1
2
KRA209
3
5
4
(KRA209 shown)
