CHIEF Kahuna, Руководство пользователя

Страница: 23 / 32

KAHUNA
Users Manual
21
2.
Attach the male quick coupler on the hose from the foot pump to the female quick
coupler on the ram making sure they are threaded tight.
NOTE:
Quick couplers must be fully tightened to allow flow of hydraulic oil to auxiliary ram.
3.
Attach pulling chain to vehicle.
4. Secure auxiliary pulling head to the ram.
5. Mount the ram base in the proper location on the vector pulling arm and secure it to the
ram with the bolt and plate. Insert the ball on the end of the ram into the ram base.
6. Determine the correct height and angle for the pull. Position the chain on the auxiliary
pulling head and secure it with the pin.
NOTE:
If more height is needed, add extension coupling and extension tube to assembly.
7.
Secure tail of chain to the end of the vector pulling arm.
WARNING
DO NOT position yourself close to, or in line with chains, clamps, or other
accessories while pressure is applied to this system. Failure to observe this warning could
result in operator injury due to the possibility of a chain or accessory disengaging or failing
while pressure is applied to this system.
CAUTION
Normal working range for 3/8” tie down chain is 500 to 3,650 psi (35 to 250
bar) on pressure gauge with applied force to the chain of 7,400 lbs (33 kN). Proof test on this
chain is 20,000 lbs (90 kN).
CAUTION
DO NOT heat chain or hook while repairing vehicle - 600°F (316°C) of heat
on chain will weaken it.
CAUTION
DO NOT tip load chain hook. Tip loading chain hook will stress hook beyond
its designed capability and could cause hook to fail.
CAUTION
DO NOT pull with twisted chain links. Pulling with twisted chain links will
stress chain links beyond their designed capability and could cause chain to fail.
CAUTION
To prevent damage to foot pump and hydraulic ram, DO NOT operate pump
when ram is fully extended.
8.
Apply just a small amount of pressure and check that the pulling setup is correct. If it is
not, release pressure and reposition.
9. Proceed with the pull.