CHIEF JWP-210, Руководство по установке

Страница: 3 / 12

Installation Instructions JWP-210
3
CONTENTS
DIMENSIONAL DRAWING
........................................2
TOOLS REQUIRED FOR INSTALLATION
.............3
INSPECT UNIT BEFORE INSTALLING ..................3
SPECIFICATIONS ......................................................3
INTRODUCTION .........................................................4
Reference Chart .......................................................4
Mounting-Hole Configurations ...............................4
COMPONENTS ...........................................................5
PARTS ..........................................................................6
SECURE WALL BRACKET .......................................7
INSTALLATION (100mm x 100mm) .........................7
Flush Mount Centris Bracket to Display ...............7
Recess Mount Centris Bracket to Display ...........8
INSTALLATION (200mm x 100mm) ........................8
Attach VESA Plate to Display ................................8
Attach Display to Centris Bracket ..........................8
INSTALLATION (200mm x 200mm) .........................9
Attach VESA Plate to Display ................................9
Attach Display to Centris Bracket ..........................9
INSTALLATION (MSB CUSTOM INTERFACE)
.....10
Attach Display to Centris Bracket
..........................10
ATTACH MOUNT TO WALL BRACKET
.................11
CABLE MANAGEMENT
.............................................12
ADJUST LATERAL TENSION
..................................12
ADJUST PITCH TENSION ........................................12
TOOLS REQUIRED FOR
INSTALLATION
•
Electric drill and bit set
•
Hex wrench set
•
Phillips screwdriver
•
Level
NOTE: Other tools may be required depending on your
display, JWP configuration and method of
installation.
INSPECT UNIT BEFORE
INSTALLING
WARNING:
Watch for pinch points. Do not put
your fingers between movable parts.
1. Carefully inspect mount for shipping damage. If any
damage is apparent, call your carrier claims agent
and do not continue with installation until carrier has
reviewed damage.
NOTE: Read all instructions before starting
installation.
2. Lay out components to ensure you have all required
parts before proceeding (see PARTS on page 6). If
you are missing any listed parts, contact Customer
Service at: 1-800/582-6480.
SPECIFICATIONS
Table 1. JWP Specifications
Depth from
Wall 3.35”
(85.07mm)
Maximum
Extension Not
Applicable
Dimensions
W x H x D
6.0” x 8.32” x 3.35”
(152 x 211.43 x 85.07mm)
Weight
Capacity
75 lbs (34kg)