CHIEF FCA1S, Руководство по установке

Страница: 6 / 8

FCA1S Installation Instructions
6
INSTALLATION
NOTE:
The FCA1S enables the mount to be attached to a
single stud, rather than to dual studs.
1. Assemble the single stud brackets-upper and lower-(B) to
the MSM1/MTM1 (See Figure 1) or MSA1/MTA1 mount
(See Figure 2) using eight 5/16" hex nuts (C).
Figure 1
Figure 2
IMPORTANT ! : When installing to a single stud, ONLY
the center teardrop slots may be used for attachment.
(See Figure 3)
2. The mount may now be installed on a single stud following
installation instructions included with the mount.
Figure 3
1
(C) x 8
[Installing to MSM1/MTM1]
(C) x 8 1
[Installing to MSA1/MTA1]
NOTE: Wall brackets may be reversed if necessary.
Center
teardrop
slots