![background image](http://html1.mh-extra.com/html/chief/an2ca1/an2ca1_installation-instructions-manual_2600250004.webp)
AN2CA1
Installation Instructions
4
ASSEMBLY AND INSTALLATION
NOTE:
The AN2CA1 may be attached into drywall with a
minimum
thickness of 1/2", to a
maximum
thickness
of 5/8".
NOTE:
The AN2CA1 may also be attached to the screen
frame, in addition to attaching to the wall.
Proceed to
Step 2
if only attaching to the wall.
1.
(OPTIONAL)
Place bracket (B) flush with the wall, and attach
it at desired location to screen frame using two #8 x 1/2” self-
drilling screws (D). (See Figure 1)
Figure 1
NOTE:
If desired, the bracket (B) may be reversed and
attached to the opposite side of the screen.
2.
Slide shelf (A) into bracket (B), ensuring that tabs in shelf
hook into bracket slots. (See Figure 2)
Figure 2
3.
Mark mounting slots from shelf (A) onto wall above bracket
(B). (See Figure 3)
Figure 3
4.
Remove shelf (A) from bracket (B). (See Figure 3)
5.
Drill one 1/2" hole at each marked location on wall.
6.
Hold metal channel on 10-24 (J) Snap-Toggle flat alongside
plastic straps and slide channel through hole. (See Figure 4)
Figure 4
7.
Holding plastic straps on anchor, pull anchor away from wall
until channel rests flush behind wall making sure anchor
channel is positioned vertically. (See Figure 5)
8.
Slide plastic cap on anchor towards wall until flange of cap
is flush with wall. (See Figure 5)
Figure 5
(B)
1
(D) x 2
2
(screen not shown)
(A)
(B)
Hook
Slot
3
4
5
(J) x 2
Drywall
Plastic Straps
6
(J) x 2
Plastic Cap
Drywall
Anchor Metal Channel
(side view)
8
7
Содержание AN2CA1
Страница 6: ...AN2CA1 Installation Instructions 6 ...
Страница 7: ...Installation Instructions AN2CA1 7 ...