80
81
STAGE 3
FORWARD-FACING INSTALLATION
STAGE 3
FORWARD-FACING INSTALLATION
INSTALL USING LATCH
2
3
Make sure SuperCinch
®
LATCH Tightener strap
(Pull 2nd) is loosened to
the full length.
Make sure LATCH
Adjuster strap (Pull 1st)
is loosened to the full
length.
INSTALL USING LATCH
Do not use the lower anchors of the Child Restraint anchorage system
(LATCH system) to attach this Child Restraint when restraining a child weighing
more than 40 lbs (18 kg) with the internal harness of the Child Restraint.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
Locate LATCH Connector Storage compartments. Remove LATCH straps.
Make sure
SuperCinch®
LATCH Tightener strap (Pull 2nd) and LATCH
Adjuster strap (Pull 1st) are loosened to their full length.
Grab both ends of LATCH straps. Slide LATCH strap to red
FORWARD-FACING
opening on both sides. Note: Both LATCH Connector
Storage compartments must be open and both LATCH straps must be
loosened to their full length in order to slide LATCH straps into position.
Close both LATCH Connector Storage compartments.
2
1
3
9
5
8 7 6
4 3
2
1
PULL
2
PULL
1
1