76
77
STAGE 3
FORWARD-FACING INSTALLATION
STAGE 3
FORWARD-FACING INSTALLATION
FORWARD-FACING SETUP
Before placing the Child Restraint in the vehicle, remove Tether from
the tether compartment. If a tether anchor is not available, the Tether
should be stored properly.
See page 48 for “Vehicle Seating Positions” before installing. Make
sure the vehicle is on a level surface, if possible.
Squeeze the Recline Adjustment Handle on front of Child Restraint and
push back to adjust to an upright position as shown (a).
If a change in recline position is necessary, after Child Restraint is
installed, loosen the current method of installation and adjust the
recline. Repeat installation steps and refer to pages 78-95 to ensure
Child Restraint is installed correctly.
LEVEL
SLO
PE
2
1
FORWARD-FACING SETUP
3
1
5
2 3 4
6
7 8
9
3
1
3a
1
5
2
3
4
6
7
8
9
TILT