Chicco 8059147053990, Руководство пользователя

Страница: 6 / 64

6 7
Thermal feeding bottle & food
holder
WARNINGS
Please read this information before use and keep for future
reference.
With the stainless steel feeding bottle and food holder you will be
able to:
• you can take our Chicco NaturalFeeling feeding bottles out and
about with you.
• take your child’s baby food wherever you go thanks to two 250
ml jars (supplied), while maintaining its temperature inside the
thermal bottle and food holder for 2 to 5 hours* depending on
the type of food.
The stainless steel holder can also be used as a thermos for other
hot or cold solid foods or fresh drinks (do not use to store and carry
hot drinks in direct contact with the stainless steel walls).
The body of the thermal bottle and food holder is made of stainless
steel for maximum sturdiness.
Preparation and cleaning
- Once you have removed the product from its packaging, ensure
you keep all outer and inner packaging out of the reach of children.
- Wash the product thoroughly before using for the first time.
- The container should be periodically cleaned. The best results are
obtained using a mix of water and bicarbonate of soda or washing
up liquid. Then rinse thoroughly.
- Never place the thermal bottle and food holder in the dishwasher.
Do not clean the product with abrasive products.
- Do not sterilise.
- Let it dry completely before closing the cap and keep in a clean,
dry place.
- Keep the thermal bottle and food holder out of the reach of children.
For your child’s safety and health.
WARNING!
- Bowl and baby food container cover: Always use this product with
adult supervision.
- Before each use, inspect the product. Throw away at the first signs
of damage or weakness
- Avoid knocking. The product may break if dropped.
• Always check food temperature before feeding your child.
- Always keep it in a vertical position.
- The length of time that the temperature is maintained depends on
the quantity and initial temperature of the content, the frequency
the thermal bottle and food holder is opened and the outside tem-
perature.
- Make sure the thermal bottle and food holder is closed well before
transporting.
- Pay attention when opening the thermal bottle and food holder
so as not to spill the content.
Instructions for use.
- Before using, preheat or pre-cool the thermal bottle holder with
water to guarantee better temperature maintenance. Never use a
microwave, conventional ovens or freezers to assit the tempera-
ture of the thermal bottle holder.
WARNING! Leave the cap open during this phase.
After removing all the water dry the product thoroughly; place the
Chicco NaturalFeeling range feeding bottle, the plastic food con-
tainer (after closing its lid tightly) or the drink carefully inside the
appliance and screw on the cap tightly.
Close the product adding the cover.
The cutlery holder pocket on the side of the feeding bottle and food
holder is useful for holding your child’s cutlery or little accessories.
Open and close the pocket by lifting or replacing the cover.
The cover can be used as a bowl for serving baby food to your child;