SKU 93652
For technical questions, please call 1-800-444-3353;
PAGE 10
Troubleshooting section at end of manual.
ASSEMBLY INSTRUCTIONS
NOTE:
For additional information regarding the parts listed in the
following pages, refer to the Assembly Diagram on page 21.
1.
WARNING! Always make sure the GFCI Plug (13) of the Pressure Washer
is unplugged from its electrical outlet, the unit is disconnected from its water
supply, and all pressure has been released from the unit prior to assembling the
tool, adding any accessories, or making adjustments to the tool.
2.
Attach the Extension Wand (25) to the Spray Gun (21) by inserting the tip of the
Extension Wand into the Spray Gun Collar. Then push in firmly and rotate the
Extension Wand to secure the Wand to the Gun. Make sure to pull on the Exten-
sion Wand to ensure it is properly attached to the Spray Gun. (See Figure D.)
FIGURE D
SPRAY GUN
(21)
EXTENSION WAND
(25)
