Chicago Pneumatic PHB 3-14, Руководство по эксплуатации

Страница: 16 / 20

Technical data
Machine data
PHB 3-14
20 (44) Weight without auger, kg (lb)
1085 x 475 x 300 (42 x 19 x 12) Measurement, L x H x W, mm (in.)
15-40 Oil flow, l.p.m
80-140 (1,160-2,030) Working pressure, bar (psi)
160 (2,300) Maximum pressure, bar (psi)
50 (725) Maximum back pressure in return line, measured at machine, bar (psi)
90 15 l.p.m Maximum rotational speed, r.p.m
125 20 l.p.m
188 30 l.p.m
315 Maximum torque at 140 bar(Previous models equipped with OMR 250 motor: Maximum
pressure setting 80 bar, note that you can still have 160 bar on the pressure line), Nm
500 (20) Extension rod, mm (in.)
C, D and E EHTMA category
Vibration declaration statement
Vibration value A and uncertainty B determined according to EN ISO 20643. See table ”Noise and vibration
data” for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the
machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Noise and vibration data
Vibration Noise
Three axes values Sound power Sound pressure
Declared values Declared values
EN ISO 28927-5 2000/14/EC EN ISO 11203
B
m/s
2
spreads
A
m/s
2
value
Lw
guaranteed dB(A)
rel 1pW
Lp
r=1m dB(A) rel
20µPa Type
2.30 7.40 - <70 PHB 3-14 (20 l.p.m)
2.80 8.60 - <70 PHB 3-14 (30 l.p.m)
3392 5231 01b | Original instructions 16
PHB 3-14 Safety and operating instructions