WARNING
Slipping, tripping and
falling hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
►
Always make sure that no hose or other object is
in your way or in any other person's way.
►
Always make sure you are in a stable position with
your feet as far apart as your shoulders width and
keeping a balanced body weight.
DANGER
Electrical hazard
The machine is not electrically insulated. If the
machine comes into contact with electricity, serious
injuries or death may result.
►
Never operate the machine near any electric wire
or other source of electricity.
►
Make sure that there are no concealed wires or
other sources of electricity in the working area.
WARNING
Involuntary start
Involuntary start of the machine may cause injury.
►
Keep your hands away from the start and stop
device until you are ready to start the machine.
►
Learn how the machine is switched off in the event
of an emergency.
►
Stop the machine immediately in all cases of
power supply interruption.
WARNING
Noise hazard
High noise levels can cause permanent and disabling
hearing loss and other problems such as tinnitus
(ringing, buzzing, whistling, or humming in the
ears). To reduce risks and prevent an unnecessary
increase in noise levels:
►
Risk assessment of these hazards and
implementation of appropriate controls is
essential.
►
Operate and maintain the machine as
recommended in these instructions.
►
Select, maintain and replace the insertion tool as
recommended in these instructions.
►
If the machine has a silencer, check that it is in
place and in good working condition.
►
Always use hearing protection.
►
Use damping material to prevent work pieces
from 'ringing'.
WARNING
Nominal pressure
If the maximum nominal pressure for the hydraulic
machine is exceeded, it can result in material damage
and personal injury.
►
Always run the hydraulic machine with a tool that
does not require a continuously higher pressure
than the stated nominal pressure. See section
"Technical data".
Maintenance, precautions
WARNING
Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
►
Never modify the machine. Modified machines
are not covered by warranty or product liability.
►
Always use original parts, insertion tools, and
accessories.
►
Change damaged parts immediately.
►
Replace worn components in good time.
WARNING
Hot components
Under normal working conditions the engine
components, particularly the exhaust system, will
get hot. The hydraulic oil, pump, valve, and tank
can also reach high temperatures that can cause
burns.
►
Never touch a hot exhaust system, hydraulic oil,
pump, valve or tank.
WARNING
Accessory hazards
Accidental engagement of accessories during
maintenance or installation can cause serious
injuries, when the power source is connected.
►
Never inspect, clean, install, or remove accessories
while the power source is connected.
Storage, precautions
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
9
3392 5183 01b | Original instructions
Safety and operating instructions
PAC P13
