Chicago Pneumatic CS7000, Руководство по обзору аппаратуры

Страница: 37 / 46

Chapter 3. Installing the CS7000 Controller
____________________________________________________________________________________________
December 2005
Page 3-7
A remote input circuit schematic is shown in Figure 3-2.
Figure 3-2. Remote Input Circuit Schematics
To ensure that you operate the fastening system properly, refer to Table 3-2 for input requirements.
Table 3-2. Guidelines for Proper Operation of the Controller I/O Signals
Discrete Inputs Unit
Highest permissible input voltage 30 V
Lowest permissible input voltage -5 V
Minimum guaranteed input activation 10 V
Maximum guaranteed input deactivation 1.5 V
Discrete outputs Unit
Maximum output current 360 mA
Maximum voltage 28 Volts DC
NOTE:
????
Installing J8 (supplied 24 VDC to “output-common-bus” and
each of the individual output (J12 and J13 jumpers) eliminates
the need to wire 24VDC to the output terminals for sourcing.