FREQUENTLY ASKED QUESTIONS & ANSWERS
Question
Answer
Can the Supercapacitor of the be replaced?
Yes. Contact your nearest distributor for replacement of the Capacitors.
I have a regular 10amp battery charger. Can I use it to
charge a Batteryless Jump Starter?
Yes, but strongly recommended to use the originally supplied fully
automatic charger.
How many jump starts can a fully charged Batteryless
Jump Starter do before needing to be recharged?
1 to 100, depending on: temperature, general condition of the vehicle,
engine type and size.
What is the ideal temperature of the Batteryless Jump
Starter?
Room temperature would the best. The Batteryless Jump Starter
could be also operated at wide temperature range below-40C° + 45C°;
however, in cold temperature the power will be a bit less. Never attempt
to charge or boost a frozen battery. Intense heat will activate self-
discharge of the battery.
DISPOSAL
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
•
Repair only by technical maintenance staff.
Do not dispose of electric tools together with household waste material!
According to Directive 2012/19/EU concerning Waste Electrical and Electronic Equipment (WEEE), this product must be recycled.
Please contact your „Customer Centre“ or consult the website „www.cp.com“ to find out where you can recycle this product.
EU DECLARATION OF CONFORMITY
We :
Chicago Pneumatic Tool Co. LLC 1815 Clubhouse Road, Rock Hill, SC 29730 - USA
Machine type(s):
Batteryless Jump Starter
Declare under our sole responsibility that the product(s):
CP90600
Serial Number:
00001 - 99999
Origin of the product :
Switzerland
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“
“Low voltage”
2014/35/EU, (LVD), 2014/30/EU (EMC) & RoHS 2011/65/EU
applicable harmonised standard(s) :
EN 60335-2-29:2004 /A2:2010, EN 55014-2:1997+A1:2001, A2:2008, EN 60335-1: 2002/A15: 2011 + A11:2014
EN 61000-6-1:2007, EN 55014-1:2006/A1:2009, EN 61000-6-3:2007 + /A1:2011, EN62233
Name and position of issuer :
Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 10/2017
Technical file available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint
Herblain - France
Copyright 2017, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model
denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is
not covered by Warranty or Product Liability.
Original Instructions
Содержание CP90600
Страница 22: ...NOTES ...
Страница 23: ...NOTES ...