Chicago Pneumatic CP3750-085AA7, Руководство по технике безопасности

Страница: 5 / 136

Angle Grinder Safety Information
© Chicago Pneumatic - 6159929470
5
Technical Data
Tool Data
Free
speed
(rpm) Spindle
thread Weight
(kg) Weight
(lb)
CP3750-085AA7 8500 M14 2.9 6.4
CP3750-085AB7 8500 5/8-11 2.9 6.4
Maximum working pressure
6.3 bar / 90 psig
Declarations
EU DECLARATION OF CONFORMITY
We,
CHICAGO PNEUMATIC Tool Co. LLC
, 1815 Club-
house Road, Rock Hill, SC 29730 - USA, declare under our
sole responsibility that the product (with name, type and se-
rial number, see front page) is in conformity with the follow-
ing Directive(s):
2006/42/EC (17/05/2006)
Harmonized standards applied:
EN 11148-7:2012
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain, 09/06/2020
Pascal ROUSSY
Signature of issuer
Noise and vibration
CP3750-085AA7 CP3750-085AB7
Sound pressure
level (dB(A)) 89 89
Vibration (m/s²) 5.9 5.9
Vibration uncer-
tainty 2.9 2.9
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, CHICAGO PNEUMATIC Tool Co. LLC , cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
http://
www.pneurop.eu/index.php and selecting 'Tools' then 'Legis-
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.