Page 4
SKU 97750
For technical questions, please call 1-800-444-3353.
disconnect the Power Cord (34)
c.
from the power source before mak-
ing any adjustments, changing ac-
cessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool.
Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use.
Many accidents are
caused by poorly maintained power
tools.
Keep the power tool clean.
f.
Improp
-
er cleaning of the Paint Sprayer and
its accessories is a common reason
for the Spray Gun to jam or not per
-
form properly.
use the power tool, accessories
g.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use
of the power tool for operations differ
-
ent from those intended could result
in a hazardous situation.
Service
5.
Have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
SPECIFIC SAFETY
WARNINgS
Maintain labels and nameplates
1.
on the Paint Sprayer.
These carry
important safety information. If un
-
readable or missing, contact Harbor
Freight Tools for a replacement.
Avoid unintentional starting.
2.
Pre-
pare to begin work before turning on
the Paint Sprayer.
For your safety, maintenance
3.
should be performed regularly by
a qualified service technician.
The
Paint Sprayer and its accessories
must be thoroughly cleaned after
every use.
Do not spray near open flames,
4.
pilot lights, stoves, heaters, or any
other heat source.
Most solvents
and coatings are highly flammable,
particularly when sprayed.
do not
smoke while spraying.
Read all of the information con-
5.
cerning coating products and
cleaning solvents.
Chlorinated sol-
vents (i.e., trichlorethylene and meth
-
ylene chloride) can chemically react
with aluminum and may explode.
Many Paint Sprayers contain alumi
-
num. If you have any doubt about
potential chemical reactions contact
the solvent or coating manufacturer.
Materials used when painting or
6.
cleaning may be harmful or fatal
if inhaled or swallowed.
Only use
in an area with adequate ventilation.
Use a NIOSH-approved dust mask
or respirator when painting or using
solvents.
